What is the difference between show arp kernal & show arp switch on a Cisco 5508?

fburejsza — Mon, 05 Jul 2021 09:14:26 GMT

Which command shows me the arp table for Ethernet data ports? What does the other table show me?

Show arp kernel , show

Saurav Lodh — Fri, 09 Jan 2015 22:35:23 GMT

Show arp kernel , show actually how the Arp cache is in kernel level, showing flags , for detail info refer

http://linux-ip.net/html/ether-arp.html

show arp kernel

Moin Ilyas — Mon, 19 Jan 2015 13:00:26 GMT

show arp kernel

To display the kernel Address Resolution Protocol (ARP) cache information, use the show arp kernel command.

show arp kernel

Syntax Description

This command has no arguments or keywords.

Examples

This example shows how to display kernel ARP cache information:

> show arp kernel

IP address       HW type     Flags       HW address            Mask     Device

192.0.2.1        0x1         0x2         00:1A:6C:2A:09:C2     *        dtl0

192.0.2.8        0x1         0x6         00:1E:E5:E6:DB:56     *

show arp switch

To display the Cisco wireless LAN controller MAC addresses, IP addresses, and port types, use the show arp switch command.

show arp switch

Syntax Description

This command has no arguments or keywords.

Examples

The following is a sample output of the show arp switch command:


(Cisco Controller) > show arp switch
MAC Address????????????????????IP Address??????????????????Port????????????VLAN????????????Type
------------------- ---------------- ------------??----??-------------------
xx:xx:xx:xx:xx:xx???? xxx.xxx.xxx.xxx????service port????????1??????????????????
xx:xx:xx:xx:xx:xx???? xxx.xxx.xxx.xxx????service port??????????????????????????????
xx:xx:xx:xx:xx:xx???? xxx.xxx.xxx.xxx????service port??????????????????????????????

topic Show arp kernel , show in Wireless

What is the difference between show arp kernal & show arp switch on a Cisco 5508?

Show arp kernel , show

show arp kernel

show arp kernel

Syntax Description

Examples

show arp switch

Syntax Description

Examples