topic Re: Aironet Authentication Question in Wireless

Aironet Authentication Question

c0ldshadow — Sat, 03 Jul 2021 23:04:30 GMT

I have an Aironet 1130AG Series Access Point and would like to do the following:

When users connect to the access point, a Web page opens asking for a user name and security code. Users can only access the Internet after correctly authenticating.

Can this be done with the Aironet 1130AG?

Thanks for any help.

Regards,

-Avery

Re: Aironet Authentication Question

Scott Fella — Tue, 24 Jun 2008 16:49:06 GMT

If you have an autonomous 1130AG, you will need to implement a portal of some sort like ZoneCD. If you have a WLC and the 1130AG is Lightweight, then you can use the guest access webauth page. Hope this helps.

Re: Aironet Authentication Question

rseals — Tue, 24 Jun 2008 21:13:25 GMT

When we had an autonomous network we used m0n0wall as a guest portal. It worked very well and was opensource.

Re: Aironet Authentication Question

Georgios Nikitas — Wed, 25 Jun 2008 11:50:28 GMT

The Aironet 1130AG cannot do this.

You will have to use a separate program like the ones mentioned before to do this.