topic I am getting the same with a in Wireless

Cisco aironet 1700 Ip assignment using CLI

jeffmaki1 — Mon, 05 Jul 2021 10:44:33 GMT

I am getting the error as shown below, How do I move forward and assign the IP address?

I am using cisco aironet 1700 series AP, Please help

*Mar 1 00:11:44.499: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
*Mar 1 00:12:34.499: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
*Mar 1 00:13:24.499: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP

Is the AP going to be used

Leo Laohoo — Wed, 12 Aug 2015 23:04:27 GMT

Is the AP going to be used with a controller or not?

I am getting the same with a

tgcg — Thu, 24 Sep 2015 14:42:31 GMT

I am getting the same with a number of 1702 APs (AIR-CAP17021-E-K6). The 1702's all get an IP through DHCP and the WLC's IP via option 43 however the AP then reports it can't discover the WLC and then renews it's IP and starts the cycle again...

*Mar 1 00:02:59.547: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.10.2.50 obtained through DHCP
Not in Bound state.
*Mar 1 00:03:46.047: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
*Mar 1 00:03:49.119: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.10.2.54, mask 255.255.255.240, hostname AP5897.bda2.f4e4

Translating "CISCO-CAPWAP-CONTROLLER.userdomain.intranet"...domain server (10.238.32.122)

*Mar 1 00:03:57.047: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.10.2.50 obtained through DHCP
Not in Bound state.
*Mar 1 00:04:43.547: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
*Mar 1 00:04:46.619: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.10.2.60, mask 255.255.255.240, hostname AP5897.bda2.f4e4

On the Management interface

rafael.samora — Thu, 24 Sep 2015 16:20:19 GMT

On the Management interface of the WLC.

Do you have the 'Enable Dynamic AP Management', box checked?

Paste the info:sh version

Sandeep Choudhary — Fri, 25 Sep 2015 09:06:53 GMT

Paste the info:

sh version from AP

sh sysinfo from WLC.

Regards

No

hsiautomotivesltd — Mon, 08 May 2017 10:26:20 GMT