topic Can't turn off LED on Cisco Aironet 1141 in Wireless

Can't turn off LED on Cisco Aironet 1141

sky-knight — Sun, 04 Jul 2021 05:36:52 GMT

I'm trying to turn off the LED on a Cisco Aironet 1141 p/n AIR-AP1141N-A-K9. This is a standalone AP and from the CLI I'm issuing this command:

ap(config)#led display off

The LED does not turn off after typing this command. If I do `show run' it shows up in the config so the command was accepted. Is there a different way to turn off the LED? I'm running IOS Version 12.4(21a)JA1.

Can't turn off LED on Cisco Aironet 1141

Leo Laohoo — Tue, 04 Sep 2012 23:54:35 GMT

Could be a bug on the code. Maybe try upgrading the IOS.

Can't turn off LED on Cisco Aironet 1141

Amjad Abdullah — Wed, 05 Sep 2012 05:24:24 GMT

Your image is very old. It could be buggy.

I agree with Leo that you try to upgrade to latest and check.

HTH

Amjad

You want to say "Thank you"?
Don't. Just rate the useful answers,
that is more useful than "Thank you".

Can't turn off LED on Cisco Aironet 1141

sky-knight — Wed, 05 Sep 2012 11:46:35 GMT

It doesn't look like I can download an IOS upgrade from Cisco without a support contract. I just purchased the 1141, seems like I should get free upgrades for a little while at least.

Can't turn off LED on Cisco Aironet 1141

Amjad Abdullah — Wed, 05 Sep 2012 11:53:20 GMT

If you have the 1141 AP under warranty you can send an e-mail to tac@cisco.com with the AP serial number and they can publish you the image you request.

You want to say "Thank you"?
Don't. Just rate the useful answers,
that is more useful than "Thank you".