topic Cisco Aironet 1130 AG - not able to enter the config mode in Wireless

Cisco Aironet 1130 AG - not able to enter the config mode

ribin.jones — Sun, 04 Jul 2021 03:46:59 GMT

Hi,

I just received a Cisco Aironet 1130 AG wi-fi router to configure and when I entered the router through console, I am not able to get into config mode. It says:

AP588d.09a7.93e4#conf t

% Invalid input detected at '^' marker.

Also,

AP588d.09a7.93e4#sh start

startup-config is not present

Also, this is what I see in my flash:

AP588d.09a7.93e4#sh flash:

Directory of flash:/

3 -rwx 217 Mar 01 2002 00:07:10 +00:00 env_vars

4 drwx 128 Jan 01 1970 00:02:03 +00:00 c1130-rcvk9w8-mx.bin

I need to configure this device and set up for wi-fi access in my organisation network. Let me know if you need any further info. Any help greatly appreciated.

Thanks in advance,

Ribin Jones S.B

Cisco Aironet 1130 AG - not able to enter the config mode

Surendra BG — Fri, 16 Sep 2011 04:26:11 GMT

The device is using the LWAPP image.. please upgade the same to autonomous image and convert the same..

Please use the below doc that i hv written and this will helpu!!

https://supportforums.cisco.com/docs/DOC-14960

Please dont forget to rate the usefull posts!!

Regards

Surendra

Cisco Aironet 1130 AG - not able to enter the config mode

ribin.jones — Fri, 16 Sep 2011 05:08:47 GMT

Yes, I understand I need to follow LWAPP to IOS.

The link you provided is not working.

http://tools.cisco.com/support/downloads/go/PlatformList.x?sftType=IOS+Software&mdfid=282439881&treeName=Wireless&mdfLevel=Model&url=null&modelName=Cisco+Aironet+1140+Access+Point&isPlatform=N&treeMdfId=278875243&modifmdfid=null&imname=&hybrid=Y&imst=N

My router is Aironet 1130AG. I have the below two files downloaded.

c1130-k9w7-tar.124-25d.JA1

c1200-k9w7-tar.122-15.JA

- Ribin

Cisco Aironet 1130 AG - not able to enter the config mode

ribin.jones — Fri, 16 Sep 2011 05:10:33 GMT

Also,

I get the below error while I tried.

AP588d.09a7.93e4#archive download-sw /force-reload /overwrite tf

AP588d.09a7.93e4#$ad /overwrite tftp://10.0.0.4/c1200-k9w7-tar.122-15.JA

examining image...

%Error opening (Timed out)archive download: takes 34 seconds

10.0.0.4 is my laptop IP whete I have the tftpd32 running.

- Ribin

Cisco Aironet 1130 AG - not able to enter the config mode

Leo Laohoo — Fri, 16 Sep 2011 05:24:05 GMT

Using a TFTP Server to Return to a Previous Release

Cisco Aironet 1130 AG - not able to enter the config mode

ribin.jones — Fri, 16 Sep 2011 05:51:29 GMT

I was following the link you provided:

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

But, I get the attached error in my tftp server.

Please help.

- Ribin

Re: Cisco Aironet 1130 AG - not able to enter the config mode

Leo Laohoo — Fri, 16 Sep 2011 05:54:26 GMT

Your TFTP server IP address is incorrect.

Step 1 The static IP address of the PC on which your TFTP server software runs should be between 10.0.0.2 and 10.0.0.30.

Cisco Aironet 1130 AG - not able to enter the config mode

ribin.jones — Fri, 16 Sep 2011 06:08:22 GMT

No. Infact I took the screesnhot after I connected my machine to my local LAN and that is why the IP is shown as different there in tftpd32.

I have done it oncemore and took the screenshots. Still no luck. Please find the attachment. Also, I have pasted below the log I captured from hyperterminal.

Xmodem file system is available.

flashfs[0]: 3 files, 2 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 15998976

flashfs[0]: Bytes used: 1870336

flashfs[0]: Bytes available: 14128640

flashfs[0]: flashfs fsck took 28 seconds.

Base ethernet MAC Address: 58:8d:09:a7:93:e4

Initializing ethernet port 0...

Reset ethernet port 0...

Reset done!

ethernet link up, 100 mbps, full-duplex

Ethernet port 0 initialized: link is up

button pressed for 20 seconds

process_config_recovery: set IP address and config to default 10.0.0.1

process_config_recovery: image recovery

image_recovery: Download default IOS tar image tftp://255.255.255.255/c1130-k9w7-tar.default

examining image...

%Error opening

O /

O / / O à (no such file or directory)Loading "flash:/c1130-rcvk9w8-mx.bin/c1130-rcvk9w8-mx"...#########################################################################################################################################################################

File "flash:/c1130-rcvk9w8-mx.bin/c1130-rcvk9w8-mx" uncompressed and installed, entry point: 0x3000

executing...

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

Rights clause at FAR sec. 52.227-19 and subparagraph

Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Compiled Mon 17-Jul-06 11:38 by alnguyen

Image text-base: 0x00003000, data-base: 0x0035E440

Initializing flashfs...

flashfs[1]: 3 files, 2 directories

flashfs[1]: 0 orphaned files, 0 orphaned directories

flashfs[1]: Total bytes: 15998976

flashfs[1]: Bytes used: 1870336

flashfs[1]: Bytes available: 14128640

flashfs[1]: flashfs fsck took 4 seconds.

flashfs[1]: Initialization complete....done Initializing flashfs.

%Error opening flash:/c1130-rcvk9w8-mx/info (No such file or directory)cisco AIR-LAP1131AG-A-K9 (PowerPCElvis) processor (revision B0) with 24566K/8192K bytes of memory.

Processor board ID FGL1446V0ER

PowerPCElvis CPU at 262Mhz, revision number 0x0950

Last reset from power-on

LWAPP image version 3.0.51.0

1 FastEthernet interface

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: 58:8D:09:A7:93:E4

Part Number : 73-8962-14

PCA Assembly Number : 800-24818-13

PCA Revision Number : A0

PCB Serial Number : FOC14413F8G

Top Assembly Part Number : 800-29144-03

Top Assembly Serial Number : FGL1446V0ER

Top Revision Number : A0

Product/Model Number : AIR-LAP1131AG-A-K9

Press RETURN to get started!

*Mar 1 00:00:06.385: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power source

*Mar 1 00:00:06.395: %SYS-5-RESTART: System restarted --

Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Compiled Mon 17-Jul-06 11:38 by alnguyen

*Mar 1 00:00:07.262: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up

*Mar 1 00:00:08.262: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to down

*Mar 1 00:00:11.541: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up

*Mar 1 00:00:25.402: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY

Re: Cisco Aironet 1130 AG - not able to enter the config mode

Leo Laohoo — Sat, 17 Sep 2011 00:49:31 GMT

Hmmmm ... Very weird.

How is the AP connected to your TFTP Server? Is it a direct link connection?

If so, try:

1. reboot the TFTP client (maybe there's an application that's stopping 10.0.0.0/8);

2. Try another client

3. What is the subnet mask? Is it 10.0.0.2 255.0.0.0?

Re: Cisco Aironet 1130 AG - not able to enter the config mode

ribin.jones — Mon, 19 Sep 2011 06:08:03 GMT

Got it working. Please see the below post which I followed.

https://supportforums.cisco.com/message/3445370#3445370