topic Re: Can reset aironet 1310 password and keep Previous setting in Wireless

Can reset aironet 1310 password and keep Previous setting

Chiayu.cheng — Sun, 04 Jul 2021 00:09:51 GMT

HI...I got 4 aironet 1310ï¼Œbut i don't have password into Eanble mode!!

I follow this document "Password Recovery Procedure for the Cisco Aironet Equipment.pdf" to recovery password.

It succeed reset password to defaultï¼Œbut it also reset Previous setting to defalut.

Can I reset aironet 1310 password and keep Previous setting? Plz!!

I really need help for this,thanks.

p.s My english not good

Re: Can reset aironet 1310 password and keep Previous setting

Leo Laohoo — Fri, 13 Feb 2009 04:53:44 GMT

Username: Cisco

Password: Cisco

Enable Password: Cisco

Try this and I hope it works.

Re: Can reset aironet 1310 password and keep Previous setting

Chiayu.cheng — Fri, 13 Feb 2009 07:51:38 GMT

Thank you for reply

but can't help to me.

I seeking a way that can reset password to default and can keep Previous setting

thank you

Can reset aironet 1310 password and keep Previous setting

richardbergen — Thu, 30 Aug 2012 14:36:41 GMT

years too late, but this might be helpful for someone else:

- Reboot the aironet

- As soon as you see the following, hit the ESC key twice to interrupt the booting process

flashfs[0]: 147 files, 7 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 7741440

flashfs[0]: Bytes used: 5544960

flashfs[0]: Bytes available: 2196480

flashfs[0]: flashfs fsck took 32 seconds.

Base ethernet MAC Address: 70:81:05:3a:75:0a

Initializing ethernet port 0...

Reset ethernet port 0...

Reset done!

ethernet link up, 100 mbps, full-duplex

Ethernet port 0 initialized: link is up

Loading "flash:/c1310-k9w7-mx.124-25d.JA/c1310-k9w7-mx.124-25d.JA"...############

- If you would like to view the old config, type the following command from the bridge: prompt

more flash:config.txt

- for password recovery, delete or rename the env_vars and config.txt files in flash:

bridge: dir flash:

Directory of flash:/

2 -rwx 5 private-config

3 -rwx 277 env_vars

5 drwx 256 c1310-k9w7-mx.124-25d.JA

4 -rwx 1048 private-multiple-fs

155 -rwx 1487 config.txt

- when you are finished, boot the AP by typing in boot and hitting enter