topic WLC Audit Status Mismatch in Wireless

WLC Audit Status Mismatch

martynch1 — Sun, 04 Jul 2021 07:03:04 GMT

Hi all, just a quick question and maybe a stupid one too but I feel I need to ask as its a production network.

As the title mentions I have noticed that there are a number of mismatches between the WLC and WCS when I check the audit logs, I was wondering which one should be updated when I want to clear the mismatch?

Does the Control System need to be changed to match the Wireless Controller or the other way around?

If it the WCS that needs to be changed would anything be affected on the production network?

How do the mismatches occur?

Thanks all

Martyn

Re:WLC Audit Status Mismatch

grabonlee — Thu, 09 May 2013 11:11:52 GMT

Hi

When you audit from WCS, make sure to click refresh config from controller and choose "use the config on the controller currently".
The mismatch occurs when you make changes on the WLC and save them or you make changes through the WCS and don't save config to flash for the WLC.

Sent from Cisco Technical Support Android App

WLC Audit Status Mismatch

martynch1 — Thu, 09 May 2013 12:11:51 GMT

Thank you

Re:WLC Audit Status Mismatch

grabonlee — Thu, 09 May 2013 12:42:59 GMT

You're welcome.

Sent from Cisco Technical Support Android App