topic Aironet 1200 bootloader tftp permission denied in Wireless https://community.cisco.com/t5/wireless/aironet-1200-bootloader-tftp-permission-denied/m-p/632562#M72182 <P>Aironet 1210 failed IOS upgrade through WLSE. Attempted to recover on direct connection, was able to partially download firmware image, but it failed. Formatted flash, and now the tftp image fails with "permission denied". The tftp_init command returns just the command prompt instead of the normal tftp file system ready response. Any ideas? </P> Sat, 03 Jul 2021 20:18:59 GMT smithm1 2021-07-03T20:18:59Z Aironet 1200 bootloader tftp permission denied https://community.cisco.com/t5/wireless/aironet-1200-bootloader-tftp-permission-denied/m-p/632562#M72182 <P>Aironet 1210 failed IOS upgrade through WLSE. Attempted to recover on direct connection, was able to partially download firmware image, but it failed. Formatted flash, and now the tftp image fails with "permission denied". The tftp_init command returns just the command prompt instead of the normal tftp file system ready response. Any ideas? </P> Sat, 03 Jul 2021 20:18:59 GMT https://community.cisco.com/t5/wireless/aironet-1200-bootloader-tftp-permission-denied/m-p/632562#M72182 smithm1 2021-07-03T20:18:59Z Re: Aironet 1200 bootloader tftp permission denied https://community.cisco.com/t5/wireless/aironet-1200-bootloader-tftp-permission-denied/m-p/632563#M72183 <HTML><HEAD></HEAD><BODY><P>Hi Matt,</P><P></P><P>i had a similiar issue several weeks ago. My "solution" was formatting the flash and the usage of the console port and xmodem setup.</P><P></P><P>Best regards,</P><P></P><P>Frank</P></BODY></HTML> Fri, 01 Dec 2006 12:41:09 GMT https://community.cisco.com/t5/wireless/aironet-1200-bootloader-tftp-permission-denied/m-p/632563#M72183 frankzehrer 2006-12-01T12:41:09Z