Odd Aironet 1310 problem

rpettersen — Sun, 04 Jul 2021 17:23:50 GMT

Hi !

Trying to get a Aironet 1310 (AIR-BR1310G-E-K9)working as it should, but see a stange problem after each re-load

This is config before re-load :

interface Dot11Radio0

ssid XXXXXXXXX

authentication open

infrastructure-ssid

speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0

36.0 48.0 54.0

rts threshold 4000

station-role workgroup-bridge

bridge-group 1

bridge-group 1 spanning-disabled

And after re-load :

interface Dot11Radio0

ssid XXXXXXXXX

authentication open

infrastructure-ssid

cca 0

speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0

36.0 48.0 54.0

rts threshold 4000

station-role workgroup-bridge

bridge-group 1

bridge-group 1 spanning-disabled

As you can see IOS is adding "cca 0" in configuration, and then the wireless configuration doesn't work. Just doing a "no cca" and then I see the 1310 is assosiated with the AP.

Anybody have seen this problem ?

Also trying to upgrade from 12.2(15)JA to 12.3(2)JA,

but then the unit freeze and I have to do a flash recovery back to 12.2.15. When I look into the 12.3.2 tar file, then I only see firmware for one radio and looking into 12.2.15 tar file, then I see firmware for 3 radios types.

Re: Odd Aironet 1310 problem

rpettersen — Fri, 28 Jan 2005 13:43:12 GMT

Hi !

According to cisco, this is a known bug :

Resolved Caveats in 12.3(2)JA:

CSCed46039, CSCeg18102-Clear Channel Assessment (CCA) value no longer reverts to 0 after bridge reboots

So now I have to solve the upgrade problem.

topic Re: Odd Aironet 1310 problem in Wireless

Odd Aironet 1310 problem

Re: Odd Aironet 1310 problem