topic Re: WLC web-auth cert download error in Wireless

WLC web-auth cert download error

Josh Morris — Sun, 04 Jul 2021 06:45:00 GMT

I cannot seem to get my SSL cert to install on my 5508 controller. I have tried a pfx, pem, and cer. With/without passwords. It transfers successfully, but does not install. And I only get "File transfer failed". I tried on both GUI and CLI.

Any suggestions? Thanks.

Re:WLC web-auth cert download error

rchicks — Mon, 18 Mar 2013 18:37:57 GMT

Make sure you use openssl ver .99 only to generate the pfx. Anything else will likely fail.

Sent from Cisco Technical Support Android App

Re: WLC web-auth cert download error

Amjad Abdullah — Tue, 19 Mar 2013 05:55:38 GMT

Josh:

What openssl version you use? ( rchicks: +5 for your nice answer).

Have you followed any doc to generate the cert?

Rating useful replies is more useful than saying "Thank you"

Re: WLC web-auth cert download error

maldehne — Tue, 19 Mar 2013 06:14:51 GMT

Note: OpenSSL 0.9.8 is required as the WLC does not currently support OpenSSL 1.0.

check the following links as reference:

http://www.cisco.com/en/US/partner/products/ps6366/products_configuration_example09186a0080a77592.shtml

-------------------------------------------------------------------------------------------

Please make sure to rate correct ansewer and mark this thread as answered

Re: WLC web-auth cert download error

Josh Morris — Tue, 19 Mar 2013 13:29:14 GMT

Ok, SO I have verified that we are generating the PFX with OpenSSL v. 0.9.8. This cert is still failing to install on the controller. Any other thoughts?

Re: WLC web-auth cert download error

Scott Fella — Tue, 19 Mar 2013 13:42:17 GMT

Here is the process I follow all the time. One thing also is that you need to specify a password on the cert which is required when you upload it to the WLC.

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080a77592.shtml

Sent from Cisco Technical Support iPhone App