topic Re: Deploy WPA in Wireless

Deploy WPA

jefvaneijk — Sun, 04 Jul 2021 18:23:48 GMT

What do i need to deploy WPA2?

Windows XP service pack 2?

Cisco 1210 ?

Certificate server?

Radius or ACS?

Re: Deploy WPA

scottmac — Wed, 07 Dec 2005 22:49:05 GMT

You need a current Cisco radio (~XX21), which can do the AES, and a client adapter that supports Cisco Certified Extensions version 3 (CCX v3).

I believe you need IOS 12.3(X) on the AP.

WPA-PSK works in WPA2 mode (as do the "regular" WPA / EAP combinations)

Good Luck

Scott

Re: Deploy WPA

jefvaneijk — Thu, 08 Dec 2005 08:31:22 GMT

Cisco Certified Extensions version 3 (CCX v3).

Where do i need this for?

I have AP 1210 version 12.3.X. Do i need a certificate server or something?

Re: Deploy WPA

ggiusti — Fri, 09 Dec 2005 12:39:33 GMT

The certificates depend of the kind of authentication that you use, you dont need certificates to deploy WPAv2, i mean, if you use LEAP, don´t need a certificates, otherwise if you use PEAP (MSCHAPv2) you have to use a server certificate. To deploy WPAv2 in a windows enviroment, you have to use an AP that support WPAv2 and the client could be Windows XP SP2 with the hotfix KB893357 installed, that´s all. Check this, clients copatibilities:

http://www.cisco.com/en/US/partners/pr46/pr147/partners_pgm_partners_0900aecd800a7907.html

and

http://www.cisco.com/en/US/partners/pr46/pr147/program_additional_information_new_release_features.shtml

I hope this help to you.

Guillermo.