CKIP / LEAP on Secure Services Client 5.1.0.39

neilhall — Sat, 03 Jul 2021 23:20:37 GMT

Hello,

I am in the middle of converting over to a LWAPP infrastructure as well as converting over to using the Cisco Secure Services Client.

Because I have a very large number of IOS based AP's still in service that are running LEAP with CKIP, I have a need to simultaneously support both the LWAPP infrastructure and the old IOS based infrastructure at the same time (at least for now).

I have the SSC working fine with my LWAPP WPA2/PEAP infrastructure, however I cannot get it to work on the old IOS LEAP/CKIP infrastructure. There do not appear to be any CKIP options in the SSC, and I have tried all of the other options (including all of the TKIP options) and none seem to work.

So my question is, does the SSC v. 5.1.0.39 (the latest version) not support CKIP, or am I missing something.

Thanks for any advice.

Neil

Re: CKIP / LEAP on Secure Services Client 5.1.0.39

neilhall — Wed, 20 Aug 2008 17:26:02 GMT

After getting no response here I opened up a TAC case with this exact same question.

Per the TAC: CKIP is not supported in the CSSC.

topic CKIP / LEAP on Secure Services Client 5.1.0.39 in Wireless

CKIP / LEAP on Secure Services Client 5.1.0.39

Re: CKIP / LEAP on Secure Services Client 5.1.0.39