https://community.cisco.com/t5/wireless/wcs-maps/m-p/1922244#M74261 <P>Hi all,</P><P></P><P>i have maps in autocad format (can convert to jpeg). how do i upload these maps on wcs to produce heat maps</P><P></P><P>Thanks</P> Sun, 04 Jul 2021 04:45:22 GMT Network Pro 2021-07-04T04:45:22Z https://community.cisco.com/t5/wireless/wcs-maps/m-p/1922244#M74261 <P>Hi all,</P><P></P><P>i have maps in autocad format (can convert to jpeg). how do i upload these maps on wcs to produce heat maps</P><P></P><P>Thanks</P> Sun, 04 Jul 2021 04:45:22 GMT https://community.cisco.com/t5/wireless/wcs-maps/m-p/1922244#M74261 Network Pro 2021-07-04T04:45:22Z https://community.cisco.com/t5/wireless/wcs-maps/m-p/1922245#M74262 <HTML><HEAD></HEAD><BODY><P>If you go to monitor --&gt; maps. This is the section that allows you to upload the maps. You need to have the dimensions of the floor plan so that a proper heat map can be produced. There are several steps depending on it you doing an campus or multi-story building. </P><P></P><P>Sent from Cisco Technical Support</P></BODY></HTML> Sat, 10 Mar 2012 16:44:15 GMT https://community.cisco.com/t5/wireless/wcs-maps/m-p/1922245#M74262 Shawn Purdy 2012-03-10T16:44:15Z