topic Re: Copy settings via WCS Controllers in Wireless

Copy settings via WCS Controllers

ronaldocefet — Sun, 04 Jul 2021 04:23:39 GMT

I'm ready configured with a controller, since only the second has the IP settings and passwords, I need to mirror these settings for WLC1 WLC2 via WCS then create a template for the next two configs are applied at the controllers.

Thank you.

Re: Copy settings via WCS Controllers

Scott Fella — Tue, 17 Jan 2012 12:51:47 GMT

Well you would need to discover templates from wlc1 (I"m guessing is the configured controller) and then you can push out each template to WLC2. Another way is to make a backup copy of the WLC configuration and edit that in a text file and then upload that to WLC2. Edit only the hostname, prompt and ip addres then upload that to WLC2.

http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0ctrlcfg.html#wp1134042

Copy settings via WCS Controllers

ronaldocefet — Tue, 17 Jan 2012 18:30:17 GMT

Hi, tks for answer, but i saved the config of wlc01 with download config in WCS command,

but can not upload to wlc02 informs invalid_config_file, how to proceed? they already edited for the wlc02.

Tks

Re: Copy settings via WCS Controllers

Scott Fella — Tue, 17 Jan 2012 18:32:36 GMT

Don't save the file as a .txt

Thanks,

Scott Fella

Sent from my iPhone