topic Re: Adding controllers to WCS in Wireless https://community.cisco.com/t5/wireless/adding-controllers-to-wcs/m-p/1338408#M74763 <HTML><HEAD></HEAD><BODY><P>Make sure the version of WCS supports the IOS version of your WLC4402's. I had this issue when I first installed a WCS platform. You may need to upgrade the WCS.</P></BODY></HTML> Thu, 01 Oct 2009 14:35:49 GMT Glnc66inc 2009-10-01T14:35:49Z Adding controllers to WCS https://community.cisco.com/t5/wireless/adding-controllers-to-wcs/m-p/1338407#M74762 <P>Gents</P><P></P><P>I 2 WISMs and 2 4402 controllers. the WiSM are the foreign controllers and the 4402 are my anchor controllers. I am trying to add them to the WCS for management purposes. however, I am not able. knowing that I have ICMP reachability between all the devices and the default SNMP communities are used on the WCS and the controllers. the WCS is saying object not found?? </P><P>is there any running configuration u can provide.</P><P></P><P>Any advise pls?</P><P>Thanks,</P><P>Elie</P> Sun, 04 Jul 2021 01:05:35 GMT https://community.cisco.com/t5/wireless/adding-controllers-to-wcs/m-p/1338407#M74762 eliesbat25 2021-07-04T01:05:35Z Re: Adding controllers to WCS https://community.cisco.com/t5/wireless/adding-controllers-to-wcs/m-p/1338408#M74763 <HTML><HEAD></HEAD><BODY><P>Make sure the version of WCS supports the IOS version of your WLC4402's. I had this issue when I first installed a WCS platform. You may need to upgrade the WCS.</P></BODY></HTML> Thu, 01 Oct 2009 14:35:49 GMT https://community.cisco.com/t5/wireless/adding-controllers-to-wcs/m-p/1338408#M74763 Glnc66inc 2009-10-01T14:35:49Z Re: Adding controllers to WCS https://community.cisco.com/t5/wireless/adding-controllers-to-wcs/m-p/1338409#M74764 <HTML><HEAD></HEAD><BODY><P>Hi Elie, </P><P>Make sure the WCS is of the same or higher version with the WLC.</P></BODY></HTML> Thu, 01 Oct 2009 21:57:00 GMT https://community.cisco.com/t5/wireless/adding-controllers-to-wcs/m-p/1338409#M74764 Leo Laohoo 2009-10-01T21:57:00Z