topic Re: WCS Error Adding Controller in Wireless

WCS Error Adding Controller

cherylfarria — Sat, 03 Jul 2021 22:14:54 GMT

Hello, I am having a problem adding a controller to WCS. I am able to ping and communicate between the WCS box and the controller but when I try to add the controller it erross stating "Failed to add device to WCS Reason: Object not found in device" Has anyone seen this before? I have added them before at other locations with no problem?

Also when I try to add the controller from WCS the controller log has the following:

MACADDR_GET_FAIL: Interface 1 source MAC address is not found.

Thanks

Re: WCS Error Adding Controller

Rob Huffman — Tue, 22 Jan 2008 16:54:43 GMT

Hi Cheryl,

It sounds like a SNMP problem. Here are two good threads that describe this issue/fix;

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=Getting%20Started%20with%20Wireless&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddd2cbe

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=Security%20and%20Network%20Management&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddb90d1

Hope this helps!

Rob

Re: WCS Error Adding Controller

cherylfarria — Tue, 22 Jan 2008 19:54:03 GMT

Thanks for the links Rob, They helped with a little more troubleshooting.

But still no luck. The strange thing is it gets to the controller. It I set the snmp string wrong on the WCS the controller reports the error. But when it is set correct the log on the controller gives the error "interface 1 source MAC address is not found"

I do not have radius server set up and I have tried recreating the snmp strings and get the same errors.. ask!! haha Thanks again!