topic Error deleting radius server on WLC in Wireless

Error deleting radius server on WLC

ajmadriaga — Sun, 04 Jul 2021 06:10:40 GMT

When I try to delete any of the authentication servers on the WLC it gives the error "error in deleting auth server". When I try to delete it in the CLI, it says "Error: Server does not exist". But clearly it shows up on the list in the GUI.

When I try to edit any details on any of the authentication servers is gives the error "Error in disabling state".

Is there anyway to delete the servers or enable them? The authentication servers were enabled and working before we updated from 7.0.230 to 7.2.110.

Re: Error deleting radius server on WLC

Saravanan Lakshmanan — Wed, 05 Dec 2012 21:15:37 GMT

Export the config, remove the radius servers, import the edited config to wlc. now add the servers back.

Error deleting radius server on WLC

Saravanan Lakshmanan — Thu, 06 Dec 2012 07:49:27 GMT

Does these Radius servers added to wlan, if so de-select them from wlan and try, however it is strange that it didn't let you disable the state.

display the output of below command.

WLC>show invalid-config

Error deleting radius server on WLC

ajmadriaga — Thu, 06 Dec 2012 19:01:39 GMT

This step worked: I exported the config and removed the radius servers on the config text file, then uploaded the new config, then readded the servers.

Thank you!

Error deleting radius server on WLC

Saravanan Lakshmanan — Thu, 06 Dec 2012 19:03:30 GMT

Andrew, Thank You!!! for posting the solution.