topic Re: user to user per ssid in Wireless

user to user per ssid

abelliu86 — Sun, 04 Jul 2021 05:33:19 GMT

Hi,

I'm having some difficulties configuring my Cisco WLC (5508) - ver 7.0.230.0 .

I'm have multiple client device residing on same vlan associated to the WLC but unable to telnet over port 8090. However, when inter-vlan, client device able to telnet over port 8090.

So in brief :

Say Machine A as application hosted machine and Machine B as client machine;

Machine A	Machine B	Telnet over port 8090 from B to A
In Vlan 6	In vlan 6	Not ok
in Vlan 6	In vlan 4	OK
inVlan 4	In vlan 6	OK

Any advice where i should be looking on the WLC to allow telnet port 8090 over from Machine A to B within the vlan .

Thanks.

Re: user to user per ssid

Scott Fella — Tue, 21 Aug 2012 10:47:11 GMT

Make sure you don't have PTP blocking enabled on the WLAN SSID advanced tab.

Sent from Cisco Technical Support iPhone App

Re: user to user per ssid

abelliu86 — Tue, 21 Aug 2012 16:40:08 GMT

nope, the ptp blocking is disabled by default and were not configuration were made. so its disable. user is still not able to telnet from device from vlan 6 to vlan 6 via port 8090. No ACL were applied. anywhere else i should look at?