topic Re: Guest SSID broadcasting option in Wireless

Guest SSID broadcasting option

Abinaya R — Sun, 04 Jul 2021 02:56:56 GMT

Hi,

In my network design, I have two WLCs. I have kept one WLC in the LAN and one in DMZ. The WLC in Lan has 90 access points associated to it. These access points are in different locations and is configured HREAP.

I have created Guest SSID and i want this SSID to be broadcasted and used only for one location.

Is there any way to do so that Guest SSID will be used in one location only and remaining locations will not use guest feature;.

Please reply. Thanks in advance

Re: Guest SSID broadcasting option

Surendra BG — Mon, 14 Mar 2011 10:55:51 GMT

Hi,

Yes you can do this.. This feature is called AP Grouping if we are using 4.2 and above WLC software.. if we are using 4.2 and below, then its called WLAN Override..

here is the link to configure the same

http://www.cisco.com/en/US/docs/wireless/controller/4.2/configuration/guide/c42wlan.html#wp1127323

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml

http://www.cisco.com/en/US/products/ps6366/products_qanda_item09186a00808b4c61.shtml

Lemme know if this answered your question!!

Regards

Surendra

Re: Guest SSID broadcasting option

Abinaya R — Wed, 16 Mar 2011 06:46:06 GMT

Hi,

AP grouping seems to be fine.. But my query is I have the SSID named GUEST, But this SSID should be broadcasted in few locations and should not be broadcasted in few locations. Is this possible with AP Groups?

Re: Guest SSID broadcasting option

Surendra BG — Wed, 16 Mar 2011 06:48:26 GMT

No.. Broadcasting SSID is a Global configuration.. We cannot do this.. lemme know if this answered your question

Regards

Surendra

Re: Guest SSID broadcasting option

Abinaya R — Wed, 16 Mar 2011 07:06:28 GMT

Ok. But, Is there any other ways to bring this solution?(i.e) All though the access points from different locations are joined in one controller through HReap, The Guest SSID should be used only in few locations and should not be used for few other locations?

Re: Guest SSID broadcasting option

Surendra BG — Wed, 16 Mar 2011 07:12:21 GMT

No there is no other solution i guess.. Since the SSID broadcasting is the Global config, we can either enable or disable it... This inturn is blindly used by the AP...

Lemme know if this answered your question!!

Regards

Surendra