topic Is it just a single in Wireless

5760 controller license

syed baseeruddin — Mon, 05 Jul 2021 11:52:48 GMT

The Controller AIR CT5760-100-K9 by default it support 100 licenses

if i need more licences for exmaple if need 9 licences

if i upload the licences of 9 APS

After uploading licenses file then we cannot the controller mgmt ip add

please kindly advice for licenses

Is it just a single

Prabath Godevithanage — Thu, 07 Apr 2016 22:48:53 GMT

Is it just a single controller or a HA setup? What do you see in the console

Thanks Preranda

syed baseeruddin — Fri, 08 Apr 2016 07:35:26 GMT

Thanks Preranda

in our one project we are having one controller 5760 .

my question is as far i know AIR-CT5760-100-K9 support by default 100AP Base License

in our project they are 109 APS

1.AIR-CAP702I-E-K9 qty is 77

2.AIR-CAP1602-E-K qty is 32

my question once we upload 9 licences in the controller.we cannot change the mgmt ip add of the controller please correct me if am wrong

The details of licences as shown below


1	AIR-CT5760-100-K9	Cisco 5700 Series Wireless Controller for up to 100 APs	1
2	LIC-CT5760-100	100 AP Base license	1
3	L-LIC-CTIOS-1A	AP adder license for IOS based Wireless LAN Controllers	9

As far as I know ap adder

Prabath Godevithanage — Fri, 08 Apr 2016 11:31:00 GMT

As far as I know ap adder licenses for 5760 are RTU licenses and wont be locked to any node.So I dont think you would have a problem changing the management ip

Thanks preranda,

syed baseeruddin — Sat, 09 Apr 2016 11:19:42 GMT

Thanks preranda,

could you please provide any document of RTU licenses which wont be locked to any node.

Hi Sayed, here is one but you

Prabath Godevithanage — Sat, 09 Apr 2016 11:38:43 GMT

Hi Sayed, here is one but you'll find few around

Thanks preranda,

syed baseeruddin — Sun, 10 Apr 2016 05:15:10 GMT

Thanks preranda,

Regarding problem of changing mgmt ip add after uploading the additional licence file.

i refer the document which u sent the link https://supportforums.cisco.com/document/12068056/ngwc-how-activate-ap-count-licenses-and-deactivate-evaluation-license-cisco-5760

Other wireless controller platforms such as the Cisco 5508 Wireless Controller, Cisco Wireless Services Module 2 (WiSM2), and Cisco 2500 Series Wireless Controller will continue to use the node-locked licensing model, in which the access point count licenses are tied to the hardware.

The New WLC controller 5760 we can the mgmt ip add but like wisim2,2500,5508 we cannot change the mgmt ip add after uploading the licence file

please correct me if am wrong