https://community.cisco.com/t5/wireless/2504-lightweight-controlers/m-p/2866220#M78100 <P>Could be a bug.</P> Thu, 03 Mar 2016 04:41:10 GMT Leo Laohoo 2016-03-03T04:41:10Z https://community.cisco.com/t5/wireless/2504-lightweight-controlers/m-p/2866219#M78099 <P>Hi</P> <P>What would cause a Lightweight Access Point 1242, 3602 etc to pick up a dhcp address from a 2504 controller when it has a fixed IP configured?</P> <P></P> <P>When this has happened &amp; I look at the Wireless\AP\general page I see both the fixed IP I have given it the "tick" to say it has a fixed IP &amp; the IP address the controller DHCP address it has been given by the 2504.</P> <P></P> <P>If I reset the AP it uses the fixed IP again.</P> <P></P> <P>Your thoughts on why this is happening would be appreciated.</P> <P></P> <P>Thanks.</P> <P></P> <P>John</P> Mon, 05 Jul 2021 11:42:54 GMT https://community.cisco.com/t5/wireless/2504-lightweight-controlers/m-p/2866219#M78099 John Clarke 2021-07-05T11:42:54Z https://community.cisco.com/t5/wireless/2504-lightweight-controlers/m-p/2866220#M78100 <P>Could be a bug.</P> Thu, 03 Mar 2016 04:41:10 GMT https://community.cisco.com/t5/wireless/2504-lightweight-controlers/m-p/2866220#M78100 Leo Laohoo 2016-03-03T04:41:10Z