topic i am damn new in this field . in Wireless

Cisco wireless controller Backup via GUI

wikeekhan — Mon, 05 Jul 2021 10:30:59 GMT

Hi All.

I want to know how to take backup on Cisco Wireless Controller Via GUI.

Engr.Waqar.

Uploading and Downloading

Leo Laohoo — Mon, 06 Jul 2015 11:44:56 GMT

Uploading and Downloading Configuration Files

dear Leo Laohoothanks for the

wikeekhan — Mon, 06 Jul 2015 11:55:13 GMT

dear Leo Laohoo

thanks for the support .can you please guide me with the few steps ? i am damn new in this field .

i need to take backup of my wlc via GUI

THANKS

Try this from the via GUI of

J. Adams — Mon, 06 Jul 2015 17:17:41 GMT

Try this from the via GUI of your wlc assuming that you have a TFTP server on your laptop and have logged in.

1. Go to the 'Commands' tab and select 'Upload file'

2. Select file type 'Configuration', transfer mode 'TFTP'

3. Enter your laptop ip address , file path '/' and enter a unique file name

4. Select 'Upload' in the upper right and confirm the backup file is successfully backed up via your TFTP server

To recover on this wlc or a replacement, simply use the same process from the 'Download file' section

i am damn new in this field .

Leo Laohoo — Tue, 07 Jul 2015 12:51:14 GMT

i am damn new in this field .

So let me get this: You're new to the field of wireless but you don't want to bother to read and understand. And yet you call yourself an "engineer"?

You've gotta be kidding me, right?

For GUI just check the

gohussai — Tue, 07 Jul 2015 13:12:08 GMT

For GUI just check the following Image and follow as indicated. Its simple in GUI.

Dear J Adams.I tried the same

wikeekhan — Wed, 08 Jul 2015 08:09:02 GMT

Dear J Adams.

I tried the same way from one of my site I was done with but rest of my 2 sites the error showing me can you please explain why it could be ? file is attached for screenshot

Apologies if I am

J. Adams — Wed, 08 Jul 2015 20:54:33 GMT

Apologies if I am misunderstanding your problem but it appears that the process above works at 1 location but not at 2 other sites. If this is accurate and these 2 which are problematic are remote sites, RDP to machine on each local network and try again. You should find it much faster and easier from a PC on the same switch as the controller. If you have Prime Infrastructure and you are having TFTP issues in controller software upgrades from a remote site, you can use Prime Infrastructure to update controller software as well. This has proved successful for me in certain instances where attempting TFTP remotely would otherwise timeout and a local client was not immediately accessible.

Re: For GUI just check the

miroslav.peev1 — Mon, 16 Oct 2017 20:49:17 GMT

Hi All,

Is there a chance if we could automate the process of backing up the WLC configuration?

And not to do it manually.

Thank you.

Re: For GUI just check the

Mark Elsen — Tue, 17 Oct 2017 11:37:20 GMT

- If you acquire Prime Infrastructure you can enter the controller and backups will be made automatically.

Re: For GUI just check the

miroslav.peev1 — Tue, 17 Oct 2017 15:11:20 GMT

Thank you marce1000!

We are just setting up Cisco Prime in our environment....:)

Re: Dear J Adams.I tried the same

Vengatesa Prasath — Tue, 17 Oct 2017 15:24:11 GMT

Something on the network blocking the TFTP access. You can try disabling the "windows firewall" and "anti virus software" running on the PC.

Re: For GUI just check the

praveenkumar22975 — Thu, 02 Jun 2022 05:56:32 GMT

what is encryption key ? can i change or not.