topic Anchor Controller WebAuth Custom Page Question in Wireless

Anchor Controller WebAuth Custom Page Question

Ryan Curry — Mon, 05 Jul 2021 06:57:08 GMT

I have a, hopefully, quick question for the community. I'm working on migrating our public wireless to a new controller and everything is working EXCEPT when the user is redirected to the WebAuth page, they're redirected to https://1.1.1.1 Since the cert on the appliance is self signed, the users get the "do you want to trust this page" message before they can accept the terms. Is there a way I can redirect the users to the non-secure site? I'm currently running code version 7.5.102.0 on the anchor controller.

Thanks in advance!

Anchor Controller WebAuth Custom Page Question

Stephen Rodriguez — Mon, 13 Jan 2014 17:10:26 GMT

yes there is. you can disable secureweb for webauth..

config network web-auth secureweb disable

http://www.cisco.com/en/US/docs/wireless/controller/7.4/command/reference/security_solution/securitycr74_chapter_010.html#wp1465098047

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Re: Anchor Controller WebAuth Custom Page Question

Ryan Curry — Mon, 13 Jan 2014 17:23:24 GMT

Thanks Stephen - I actually went down this road but found it didn't redirect to the non-secure site. Now that I disabled it again and rebooted the controller it's working. Seems it was the reboot I was missing.

I greatly appreciate you help!