topic Client cannot communicate between each other (WLC 4402) in Wireless

Client cannot communicate between each other (WLC 4402)

Michel Legare — Sun, 04 Jul 2021 04:53:24 GMT

Hi,

My client cannot communicate between each other, why ?

Controller: AIR-WLC4402-25-K9

AP: AIR-LAP1252AG-A-K9

Thanks

Stephen Rodriguez — Wed, 28 Mar 2012 14:10:07 GMT

can you post the config of the wlan?

Steve

Michel Legare — Wed, 28 Mar 2012 14:19:39 GMT

How i can save the config ?

Michel Legare — Wed, 28 Mar 2012 14:40:06 GMT

i think its the Peer-to-Peer Blocking configuration

Stephen Rodriguez — Wed, 28 Mar 2012 14:45:38 GMT

that is what I was thinking, and why I asked for the WLAN config, to see what all was configured.

If you disalbe P2P they should be able to communicate.

Steve

Michel Legare — Wed, 28 Mar 2012 14:51:52 GMT

its already at disable. How i can send you the config ?

Amjad Abdullah — Fri, 30 Mar 2012 12:20:04 GMT

Mike:

U can use "show WLAN detail {WLAN I'd}

U know wlan id of your SSID using GUI or cli (show WLAN summary)

Or u can send the whole config of WLC : show run-config

To avoid pressing a button every page, disable paging using: config paging disable.

HTH

Amjad

Sent from Cisco Technical Support iPad App