topic Re: adding additional dhcp scopes to a 5508 controller in Wireless https://community.cisco.com/t5/wireless/adding-additional-dhcp-scopes-to-a-5508-controller/m-p/1851430#M79467 <HTML><HEAD></HEAD><BODY><P>there is not. You will need to change the mask on the gateway and the scope. The WLC does not support secondary addresses. </P><P></P><P>Steve</P><P></P><P>Sent from Cisco Technical Support iPhone App</P></BODY></HTML> Wed, 01 Feb 2012 20:08:46 GMT Stephen Rodriguez 2012-02-01T20:08:46Z adding additional dhcp scopes to a 5508 controller https://community.cisco.com/t5/wireless/adding-additional-dhcp-scopes-to-a-5508-controller/m-p/1851429#M79466 <P>Ok guys and gals. Here is my situation</P><P></P><P>I have two 5508 controllers configured with an internal dhcp scope. The scopes on each controller are a /22. I need to expand the scope to provide more addresses. Is there an easy way to add a second dhcp scope without making changes to the existing scope? If so how will the clients devices be able to access that ip address range?</P><P></P><P>Sent from Cisco Technical Support iPad App</P> Sun, 04 Jul 2021 04:29:34 GMT https://community.cisco.com/t5/wireless/adding-additional-dhcp-scopes-to-a-5508-controller/m-p/1851429#M79466 Shawn Purdy 2021-07-04T04:29:34Z Re: adding additional dhcp scopes to a 5508 controller https://community.cisco.com/t5/wireless/adding-additional-dhcp-scopes-to-a-5508-controller/m-p/1851430#M79467 <HTML><HEAD></HEAD><BODY><P>there is not. You will need to change the mask on the gateway and the scope. The WLC does not support secondary addresses. </P><P></P><P>Steve</P><P></P><P>Sent from Cisco Technical Support iPhone App</P></BODY></HTML> Wed, 01 Feb 2012 20:08:46 GMT https://community.cisco.com/t5/wireless/adding-additional-dhcp-scopes-to-a-5508-controller/m-p/1851430#M79467 Stephen Rodriguez 2012-02-01T20:08:46Z