topic lost connection on lan controller 2106 in Wireless

lost connection on lan controller 2106

mavega2005 — Sat, 03 Jul 2021 22:52:24 GMT

hi,

I have problem with access point air-lap1242ag-a-k9 work with lan controller air-wlc2106-k9.

the connection works well during a time but soon it is lost during few minutes and soon it raises automatic, this process repeats the day throughout. I have seen that valor AP ID in the LAN controller changes when this happens.

thanks for the aid

Marcos.

Re: lost connection on lan controller 2106

jeromehenry_2 — Tue, 20 May 2008 06:19:55 GMT

Hi Marcos,

So are you saying that the AP disapears from the controller for a little while, then comes back?

Are the APs in the same subnet as the management/ AP manager interfaces? I would do a debug lwapp events enable and check how many broadcast sources you have in this subnet. It happens that when there are too many sources of broadcast, APs get disconnected; isolating the APs in another subnet/VLAN usually solves the issue.

Jerome