topic Re: Replacing 4402 Wireless controller in Wireless https://community.cisco.com/t5/wireless/replacing-4402-wireless-controller/m-p/911170#M80673 <HTML><HEAD></HEAD><BODY><P>hi, just backup the configuration on the old 4402-25, and restore in on the new 4402-50. it should work.</P></BODY></HTML> Wed, 19 Dec 2007 06:38:26 GMT sharon-b 2007-12-19T06:38:26Z Replacing 4402 Wireless controller https://community.cisco.com/t5/wireless/replacing-4402-wireless-controller/m-p/911169#M80672 <P>Hi all, Not too familiar with cisco wireless yet but I am replacing a 4402 WC that support 25 AP's to a 4402 that supports 50 AP's. I am running 4.1.185 code (upgraded the new one to this code level) and TFTP'd the configuration off the old one to the new one and am going to replace it. I was wondering if anyone has learned of any "gotcha's" during a replacement like this or is it just straigt forward unplug the old and plug in the new one?</P> Sat, 03 Jul 2021 22:07:01 GMT https://community.cisco.com/t5/wireless/replacing-4402-wireless-controller/m-p/911169#M80672 marc-berger 2021-07-03T22:07:01Z Re: Replacing 4402 Wireless controller https://community.cisco.com/t5/wireless/replacing-4402-wireless-controller/m-p/911170#M80673 <HTML><HEAD></HEAD><BODY><P>hi, just backup the configuration on the old 4402-25, and restore in on the new 4402-50. it should work.</P></BODY></HTML> Wed, 19 Dec 2007 06:38:26 GMT https://community.cisco.com/t5/wireless/replacing-4402-wireless-controller/m-p/911170#M80673 sharon-b 2007-12-19T06:38:26Z Re: Replacing 4402 Wireless controller https://community.cisco.com/t5/wireless/replacing-4402-wireless-controller/m-p/911171#M80674 <HTML><HEAD></HEAD><BODY><P>cool...that is what I have done. I will give it a try and see what happens. Thanks for the help</P></BODY></HTML> Thu, 20 Dec 2007 16:37:47 GMT https://community.cisco.com/t5/wireless/replacing-4402-wireless-controller/m-p/911171#M80674 marc-berger 2007-12-20T16:37:47Z