topic 2006 Controller wont boot up in Wireless https://community.cisco.com/t5/wireless/2006-controller-wont-boot-up/m-p/552272#M80914 <P>Hi,</P><P></P><P>When i try to console to the 2006 Controller with terminal emulation software, nothing appears on the screen.the Comms parameters is set to 9600-8-N-1,terminal emulation doesn't work for both Auto Detect and VT100.</P><P>Thanks and Regards,</P> Sun, 04 Jul 2021 19:11:26 GMT mohankumarm 2021-07-04T19:11:26Z 2006 Controller wont boot up https://community.cisco.com/t5/wireless/2006-controller-wont-boot-up/m-p/552272#M80914 <P>Hi,</P><P></P><P>When i try to console to the 2006 Controller with terminal emulation software, nothing appears on the screen.the Comms parameters is set to 9600-8-N-1,terminal emulation doesn't work for both Auto Detect and VT100.</P><P>Thanks and Regards,</P> Sun, 04 Jul 2021 19:11:26 GMT https://community.cisco.com/t5/wireless/2006-controller-wont-boot-up/m-p/552272#M80914 mohankumarm 2021-07-04T19:11:26Z Re: 2006 Controller wont boot up https://community.cisco.com/t5/wireless/2006-controller-wont-boot-up/m-p/552273#M80915 <HTML><HEAD></HEAD><BODY><P>Make sure you are using a null-modem cable.</P></BODY></HTML> Fri, 23 Jun 2006 15:49:22 GMT https://community.cisco.com/t5/wireless/2006-controller-wont-boot-up/m-p/552273#M80915 Scott Fella 2006-06-23T15:49:22Z Re: 2006 Controller wont boot up https://community.cisco.com/t5/wireless/2006-controller-wont-boot-up/m-p/552274#M80916 <HTML><HEAD></HEAD><BODY><P>9600-none-8-1-none, make sure flow control is turned off, and a null modem cable. Don't try to use a standard console cable with an adapter on it.</P></BODY></HTML> Fri, 23 Jun 2006 16:16:36 GMT https://community.cisco.com/t5/wireless/2006-controller-wont-boot-up/m-p/552274#M80916 Stephen Rodriguez 2006-06-23T16:16:36Z