https://community.cisco.com/t5/wireless/load-profile-updated-to-pass-for-base-radio/m-p/2863995#M81343 <P>hi team</P> <P></P> <P>facing below error on my WLC 2504.</P> <P></P> <P>load profile updated to pass for base radio mac: XX:XX:XX:XX:XX:XX and slotNo: 0</P> <P></P> <P>can anyone let me that that what does it mean?</P> <P></P> <P>regards,</P> <P>darshin&nbsp;</P> Mon, 05 Jul 2021 12:14:49 GMT Darshin Gadhia 2021-07-05T12:14:49Z https://community.cisco.com/t5/wireless/load-profile-updated-to-pass-for-base-radio/m-p/2863995#M81343 <P>hi team</P> <P></P> <P>facing below error on my WLC 2504.</P> <P></P> <P>load profile updated to pass for base radio mac: XX:XX:XX:XX:XX:XX and slotNo: 0</P> <P></P> <P>can anyone let me that that what does it mean?</P> <P></P> <P>regards,</P> <P>darshin&nbsp;</P> Mon, 05 Jul 2021 12:14:49 GMT https://community.cisco.com/t5/wireless/load-profile-updated-to-pass-for-base-radio/m-p/2863995#M81343 Darshin Gadhia 2021-07-05T12:14:49Z https://community.cisco.com/t5/wireless/load-profile-updated-to-pass-for-base-radio/m-p/2863996#M81344 <P>You are hitting the threshold setting under the wireless settings&nbsp; for the number of clients</P> <P>under wireless tab</P> <H1 id="headerchd">802.11b &gt; RRM &gt; General</H1> <P>or</P> <H1 id="headerchd">802.11a &gt; RRM &gt; General</H1> <P></P> <P>A</P> <P></P> Wed, 29 Jun 2016 15:59:37 GMT https://community.cisco.com/t5/wireless/load-profile-updated-to-pass-for-base-radio/m-p/2863996#M81344 Andrew MacTaggart 2016-06-29T15:59:37Z