topic Radio Interface Resets. in Wireless

Radio Interface Resets.

srihari_rgda — Sat, 03 Jul 2021 21:38:20 GMT

Hi,

we have found a specular error on the radio interface of the Access Point.

Errors on the Radiso Interface area as below.

Dot11Radio0 is up, line protocol is up

47575 output errors, 0 collisions, 4 interface resets

0 babbles, 0 late collision, 0 deferred

0 lost carrier, 0 no carrier

0 output buffer failures, 0 output buffers swapped out

Please Help me up.

Regards

SRIHARI

Re: Radio Interface Resets.

irisrios — Fri, 21 Sep 2007 17:30:26 GMT

Reset indicate number of tims interface has been reset. This happens when th packet queued for transmission is not sent within specified seconds. This might be due to a cable problem on serial line or malfunctioning modem that is not supplying transmit clock signals.

Re: Radio Interface Resets.

srihari_rgda — Sat, 22 Sep 2007 06:23:15 GMT

Thank you Dear,

But this problem araises on all the AP's that are in the network. so this cannot be a cable problem. What could be reason.

if the radio interfaces are reset frequently what could be the cause.

Regards

Srihari

Re: Radio Interface Resets.

IGBarrere — Mon, 24 Sep 2007 21:17:42 GMT

Are all your access points operating on the same channel? It sounds like some sort of malformed packets that they may be receiving...