topic The SSID is enabled, and i in Wireless

Not able to connect Wireless client

Lars Thulin — Mon, 05 Jul 2021 12:00:11 GMT

I have a 2504 controller, and 1702 AP's.

I am not able to use anoter accesspoint, as a wireless client (to get a LAN-port, via wireless). It is not able to connect. I have tried with two different models, with not luck. It is able to connect to another "normal" wireless SSID without any problems. But not the wireless provided by the 2504.

What am i missing? Guessing it's a setting somewhere i need to set?

Regards.

Maybe the SSID is disabled?

Leo Laohoo — Thu, 05 May 2016 00:43:49 GMT

Maybe the SSID is disabled?

Refer the configuration :

mohanak — Thu, 05 May 2016 01:29:41 GMT

Refer the configuration : http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0MR1/configuration/guide/wlc_cg70MR1/cg_wlan.html

I was hoping, that i didn't

Lars Thulin — Mon, 09 May 2016 06:45:52 GMT

I was hoping, that i didn't need to use a whole day or more, on reading documentation. I have read some, but without any luck unfortunalty.

The SSID is enabled, and i

Lars Thulin — Mon, 09 May 2016 06:46:38 GMT

The SSID is enabled, and i can search it, connect PC's/mobiles ect. But not a wireless ap, as a client.

No one that have any idea,

Lars Thulin — Wed, 11 May 2016 07:38:59 GMT

No one that have any idea why?