https://community.cisco.com/t5/wireless/wireless-device-1x-frames-too-short/m-p/2732046#M82720 <P>Hi everyone,</P><P>&nbsp;</P><P>I was requested to investigate a wireless device that is experiencing a network issue.&nbsp; I ran a debug and the client associates to AP's and roams from AP to AP quite well.&nbsp; The debug line that stands out to me is:</P><P>*dot1xSocketTask: Aug 07 08:55:43.461: 1x: frame too short (dataLen 46) - min size 5*dot1xSocketTask: Aug 07 08:55:43.461: 1x: frame too short (dataLen 46) - min size 50.</P><P>I have a fair understanding what this means, but am confused by it because the device authenticates and placed in it's appropriate authorization policy just fine.&nbsp; If anyone has any insight to what this specifically mean and if it can be changed on the controller, I would greatly appreciate it.</P><P>Attached is the log file.</P> Mon, 05 Jul 2021 10:43:20 GMT David Melanz 2021-07-05T10:43:20Z https://community.cisco.com/t5/wireless/wireless-device-1x-frames-too-short/m-p/2732046#M82720 <P>Hi everyone,</P><P>&nbsp;</P><P>I was requested to investigate a wireless device that is experiencing a network issue.&nbsp; I ran a debug and the client associates to AP's and roams from AP to AP quite well.&nbsp; The debug line that stands out to me is:</P><P>*dot1xSocketTask: Aug 07 08:55:43.461: 1x: frame too short (dataLen 46) - min size 5*dot1xSocketTask: Aug 07 08:55:43.461: 1x: frame too short (dataLen 46) - min size 50.</P><P>I have a fair understanding what this means, but am confused by it because the device authenticates and placed in it's appropriate authorization policy just fine.&nbsp; If anyone has any insight to what this specifically mean and if it can be changed on the controller, I would greatly appreciate it.</P><P>Attached is the log file.</P> Mon, 05 Jul 2021 10:43:20 GMT https://community.cisco.com/t5/wireless/wireless-device-1x-frames-too-short/m-p/2732046#M82720 David Melanz 2021-07-05T10:43:20Z