topic Ahmed,Removing one of your in Wireless

Wireless Issue

Ahmed Mukhtar — Mon, 05 Jul 2021 09:04:51 GMT

Hi,

I am experiencing an issue with my wireless AP, its an TP-link AP with three antenna's and anything connected to it via wireless is experiencing delay and hence performance degradation, all of its three antenna's are on the same channel, Is that the reason we are experiencing so much delay?

Anything connected to it via Ethernet cable is working fine.

Will removing one of the antenna make any difference?? please elaborate.

Thank you

I am not sure anyone here

Rasika Nayanajith — Fri, 05 Dec 2014 10:23:52 GMT

I am not sure anyone here able to help you on this.

Most of us here familiar with Cisco enterprise products & responding to queries specific to Cisco products.

Post this particular vendor support forum, if any available.

http://www.tp-link.com/lk/support/contact/

HTH

Rasika

Ahmed,Removing one of your

David Ritter — Fri, 05 Dec 2014 21:47:49 GMT

Ahmed,

Removing one of your antennas will disable or injure the associated transceiver. Your device has 3 such transceivers in support of 802.11n mimo protocols. They are all synchronized and transmit at the same time... on the same channel... making the signal stronger? You might be experiencing interference in your location/channel.

HTH

David

Hi David, You

Ahmed Mukhtar — Sat, 06 Dec 2014 05:24:32 GMT

Hi David,

You are right, it wont do any good removing the antenna's. What i think is that something is wrong with the wireless buffer or cache memory...because after some time ICMP echos through the wireless device go like this.

Reply from 10.92.200.2: bytes=32 time=1ms TTL=255
Reply from 10.92.200.2: bytes=32 time=500ms TTL=255

Reply from 10.92.200.2: bytes=32 time=2ms TTL=255
Reply from 10.92.200.2: bytes=32 time=600ms TTL=255

What do you say on this David?