topic Re: how to configure wireless air sap 1602?default ip adress? in Wireless

how to configure wireless air sap 1602?default ip adress?

kahilhassan — Sun, 04 Jul 2021 08:20:40 GMT

Hi does anybody know what is the default ip adress for to enter the configuration web page of the access point

air sap 1602?

how do i configure it?

I just plug it to my router and would like to configure it so it can be usable and recognised in my network

thanks

Re: how to configure wireless air sap 1602?default ip adress?

Scott Fella — Fri, 29 Nov 2013 12:48:28 GMT

Use a console cable and connect it to the AP. Default IP is 10.0.0.1 I believe unless it gets an IP address from dhcp.

Sent from Cisco Technical Support iPhone App

Re: how to configure wireless air sap 1602?default ip adress?

Rasika Nayanajith — Fri, 29 Nov 2013 17:55:21 GMT

Connect a console cable & get "show ip interface brief" output. That should tells you what is the IP assigned to your AP (BVI interface).

If your router gives DHCP & you just want to configure it for a SSID with pre-shared key, you can try some configuration like this.

hostname

dot11 ssid

authentication open

authentication key-management wpa version 2

guest-mode

wpa-psk ascii

interface Dot11Radio0

encryption mode ciphers aes-ccm

ssid

no shutdown

interface Dot11Radio1

encryption mode ciphers aes-ccm

ssid

no shutdown

interface BVI1

ip address dhcp

HTH

Rasika

**** Pls rate all useful responses *****