topic Wireless bridge to bridge question in Wireless

Wireless bridge to bridge question

Quoc Le — Sun, 04 Jul 2021 06:25:42 GMT

Hi,

I would like to know if it is possible to shoot wireless to an area using 4 wireless bridge to will be connected like this bridge >> bridge >> bridge >> brdige ?

Wireless bridge to bridge question

Scott Fella — Fri, 25 Jan 2013 20:33:44 GMT

Sure... but your two middle bridges are back to back. Is there ar reason you want to do it that way and not do point to multipoint?

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

Wireless bridge to bridge question

Quoc Le — Fri, 25 Jan 2013 20:38:24 GMT

It will be more like from 1 pole to another pole to another pole that are 1/8th from each other?

Re: Wireless bridge to bridge question

Scott Fella — Fri, 25 Jan 2013 20:56:25 GMT

Well what bridge are you going to use? I guess I need to know what your really trying to do with what equipment. I have never seen something like that and maybe using mesh is what you should be using.

Sent from Cisco Technical Support iPhone App

Re: Wireless bridge to bridge question

Sahil Mengi — Sat, 26 Jan 2013 01:32:25 GMT

Hi,

For extending wifi to outdoor enviornments, or have multiple facilities/distributed campus covered, you can select among these two approaches.

1. P-to-P/P-to-MP bridge links. (I would recommend multiple P-to-P rather than P-to-MP for better results).

Basically idea would be like this:

(wired)----RB------wifi------NR-B---(wired)----RB--------wifi---------NR-B

This topology depicts two P-to-P links.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008058f53e.shtml

2. Second outdoor Mesh, this would need just one outdoor mesh ap plugged to wired backbone and rest all mounted outdoor and powered, they would converge up to the parent(wired) using a sort of wireless routing protocol called AWPP (Cisco Prop), And provide client connectivity over 2.4 Ghz band. (Platform 1550 series)

i am sharing the design guide here for you.

http://www.cisco.com/en/US/docs/wireless/technology/mesh/7.0/design/guide/MeshAP_70.html

Thanks..

Sahil