topic Re: time server for wireless in Wireless https://community.cisco.com/t5/wireless/time-server-for-wireless/m-p/1979629#M84133 <HTML><HEAD></HEAD><BODY><P>This changes the problem description to the NTP server not reachable from controller. right?</P><P>Is the ntp vlan allowd on the ports connected to the controller? Is all parameters configured correctly?</P><P>APs (as i told you) will show UTC time if timezone delta is configured.</P><P></P><P></P><P>Sent from Cisco Technical Support iPad App</P></BODY></HTML> Wed, 11 Jul 2012 16:12:58 GMT Amjad Abdullah 2012-07-11T16:12:58Z time server for wireless https://community.cisco.com/t5/wireless/time-server-for-wireless/m-p/1979626#M84130 <P>How do the access points in a mesh network accept time from a ntp server or is it manual.</P><P>We have ntp server configured on the wireless controller. there are about 7 mesh access points connected.Will all of them get the time via ntp server from the controller or has something to be configured manually on these access points. </P><P>Please help.</P><P></P><P>Thanks in advance.</P> Sun, 04 Jul 2021 05:23:11 GMT https://community.cisco.com/t5/wireless/time-server-for-wireless/m-p/1979626#M84130 suthomas1 2021-07-04T05:23:11Z Re: time server for wireless https://community.cisco.com/t5/wireless/time-server-for-wireless/m-p/1979627#M84131 <HTML><HEAD></HEAD><BODY><P>You need only to configure the NTP on the WLC. The access points will take the time automatically.</P><P>It worths to say that APs do not show timezone differences/shifts from UTC. APs will always show UTC time.</P><P>For example, if your WLC is +4 hours from UTC, your WLC would show the clock as 13:00 but the AP will show 9:00 (UTC time and not your local timezone time).</P><P></P><P>With autonomous APs, when you configure sntp the logs still appear with UTC time until you configure the logs to use the local time.</P><P></P><P>Look at this about how to configure NTP on WLC:</P><P><A href="http://www.cisco.com/en/US/docs/wireless/controller/7.0MR1/configuration/guide/cg_gettingstarted.html#wp1144345" rel="nofollow">http://www.cisco.com/en/US/docs/wireless/controller/7.0MR1/configuration/guide/cg_gettingstarted.html#wp1144345</A></P><P></P><P></P><P>HTH</P><P></P><P>Amjad</P></BODY></HTML> Wed, 11 Jul 2012 07:13:55 GMT https://community.cisco.com/t5/wireless/time-server-for-wireless/m-p/1979627#M84131 Amjad Abdullah 2012-07-11T07:13:55Z time server for wireless https://community.cisco.com/t5/wireless/time-server-for-wireless/m-p/1979628#M84132 <HTML><HEAD></HEAD><BODY><P>thanks. I configured ntp server on the controller. However i noticed that the ntp server is not reachable from the controller. </P><P>But if i try to source ping with correct vlan, the ntp ip from the same switch as the controller , the ping is successful.</P><P></P><P>Within the controller it doesn't work. and the AP's also don't seem to get the correct time from the controller.</P><P></P><P></P><P>Appreciate your help.</P></BODY></HTML> Wed, 11 Jul 2012 15:43:32 GMT https://community.cisco.com/t5/wireless/time-server-for-wireless/m-p/1979628#M84132 suthomas1 2012-07-11T15:43:32Z Re: time server for wireless https://community.cisco.com/t5/wireless/time-server-for-wireless/m-p/1979629#M84133 <HTML><HEAD></HEAD><BODY><P>This changes the problem description to the NTP server not reachable from controller. right?</P><P>Is the ntp vlan allowd on the ports connected to the controller? Is all parameters configured correctly?</P><P>APs (as i told you) will show UTC time if timezone delta is configured.</P><P></P><P></P><P>Sent from Cisco Technical Support iPad App</P></BODY></HTML> Wed, 11 Jul 2012 16:12:58 GMT https://community.cisco.com/t5/wireless/time-server-for-wireless/m-p/1979629#M84133 Amjad Abdullah 2012-07-11T16:12:58Z