topic Wireless Guest Net in Wireless

Wireless Guest Net

ppellettiere — Sun, 04 Jul 2021 02:20:52 GMT

We are running a 4400 - Version 4.2.176 for our guest network.

My question is Does the Web authentication/Login page have to

be secure https? Can it be http?

Re: Wireless Guest Net

Sebastian Helmer — Wed, 27 Oct 2010 19:13:27 GMT

Hi,

I would say it is possible, I found an idea here:

If you have HTTPS enabled on the controller the webauth login page should use SSL. Just go under Management - HTTP and make sure you have HTTPS enabled. If you don't have it enable the webauth page would not be encrypted.

From:

https://supportforums.cisco.com/message/3121202#3121202

regards,

Sebastian

Re: Wireless Guest Net

ppellettiere — Wed, 27 Oct 2010 20:44:57 GMT

Sorry that didn't work I still have to use https...

Re: Wireless Guest Net

Sebastian Helmer — Wed, 27 Oct 2010 21:09:53 GMT

maybe my mistake, do you have http also enabled?

my post was just an example for the other case, to just https in case of http..

- Sebastian

Re: Wireless Guest Net

Scott Fella — Thu, 28 Oct 2010 03:38:10 GMT

I just tested that in my lab and you need to enable http and disable https on the management http-https configuration tab. I had to reboot the WLC in order for it to work, but that might be because I also regenerated the certificate.

Re: Wireless Guest Net

ppellettiere — Fri, 29 Oct 2010 16:49:26 GMT

I will try this after hours in case I have to re-boot.

Re: Wireless Guest Net

ppellettiere — Wed, 01 Dec 2010 18:12:38 GMT

That Worked Thank You.