topic Re: wireless bridge in Wireless https://community.cisco.com/t5/wireless/wireless-bridge/m-p/955214#M86352 <HTML><HEAD></HEAD><BODY><P>Hector</P><P></P><P>A 1242 configured for bridging using the "A" radio and a single patch antenna for both the root and non-root will work. just mount the AP on the inside wall of the building and the antenna on the outside you should be able to connect the antenna to the AP using the pig tail on the patch antenna.</P><P></P><P>remember you nee clear line of sight and the antennaas need to line up.</P><P></P><P>Good Luck</P><P></P><P>Bill</P><P></P><P></P></BODY></HTML> Fri, 27 Jun 2008 18:23:21 GMT bcolvin 2008-06-27T18:23:21Z wireless bridge https://community.cisco.com/t5/wireless/wireless-bridge/m-p/955213#M86351 <P>I have a warehouse about 500 to 600 feet away from our office network. What products do you guys recommend so I can attach another segment wirelessly to or network??</P> Sat, 03 Jul 2021 23:05:29 GMT https://community.cisco.com/t5/wireless/wireless-bridge/m-p/955213#M86351 hrodriguez112 2021-07-03T23:05:29Z Re: wireless bridge https://community.cisco.com/t5/wireless/wireless-bridge/m-p/955214#M86352 <HTML><HEAD></HEAD><BODY><P>Hector</P><P></P><P>A 1242 configured for bridging using the "A" radio and a single patch antenna for both the root and non-root will work. just mount the AP on the inside wall of the building and the antenna on the outside you should be able to connect the antenna to the AP using the pig tail on the patch antenna.</P><P></P><P>remember you nee clear line of sight and the antennaas need to line up.</P><P></P><P>Good Luck</P><P></P><P>Bill</P><P></P><P></P></BODY></HTML> Fri, 27 Jun 2008 18:23:21 GMT https://community.cisco.com/t5/wireless/wireless-bridge/m-p/955214#M86352 bcolvin 2008-06-27T18:23:21Z