Unsecured Wireless

one3cap12 — Sat, 03 Jul 2021 22:50:42 GMT

Does anybody know how I can get 2 SSID's on a Aironet 1100 AP and have 1 secured and the other non-secured......open for anybody to use?

Re: Unsecured Wireless

andrew.prince — Sat, 10 May 2008 07:17:51 GMT

Michael,

Is the AP - LWAPP enabled or IOS? you can tell via the console.

matthogue — Wed, 21 May 2008 15:08:12 GMT

You may want to see if a vlan is necessary on your network, specifically if you are running VoIP.

With a 1200 series Ap, all you have to do is configure the ssid as authentication open on the unsecured, and add the security to the other ssid.

This is what I have ...

dot11 ssid secured

authentication open eap eap_methods

authentication network-eap eap_methods

accounting acct_methods

dot11 ssid unsecured

authentication open

infrastructure-ssid optional

interface Dot11Radio0

no ip address

no ip route-cache

encryption mode wep mandatory

broadcast-key change 10800

ssid secured

ssid unsecured

Hope this helps.

I have done this for AP1200s, but not 1100s.