topic Re: Wireless Help Needed in Wireless https://community.cisco.com/t5/wireless/wireless-help-needed/m-p/763963#M86787 <HTML><HEAD></HEAD><BODY><P>If you are using the radius server for client authentication you will need to have the same config on all of the access points.</P><P></P><P>Seth Rosenthal CWNE#55</P></BODY></HTML> Thu, 07 Jun 2007 17:51:59 GMT srosenthal 2007-06-07T17:51:59Z Wireless Help Needed https://community.cisco.com/t5/wireless/wireless-help-needed/m-p/763962#M86786 <P>Hi at the moment at my work we have 4 Cisco 1240 wireless access points. One of which is the root and is connected to a radius server. The other 3 are just configured as normal access points. The problem I have is that some people can connect to some access points and some cannot. The thing I have noticed is that the 3 access points dont have the radius server settings on them. Dont know why this is like this but I want to know should all access points be setup for the radius server or is it only the root access point? I look forward to your replies.</P><P></P><P>Thanks</P><P>Ross.</P> Sat, 03 Jul 2021 21:10:48 GMT https://community.cisco.com/t5/wireless/wireless-help-needed/m-p/763962#M86786 ross_rulz 2021-07-03T21:10:48Z Re: Wireless Help Needed https://community.cisco.com/t5/wireless/wireless-help-needed/m-p/763963#M86787 <HTML><HEAD></HEAD><BODY><P>If you are using the radius server for client authentication you will need to have the same config on all of the access points.</P><P></P><P>Seth Rosenthal CWNE#55</P></BODY></HTML> Thu, 07 Jun 2007 17:51:59 GMT https://community.cisco.com/t5/wireless/wireless-help-needed/m-p/763963#M86787 srosenthal 2007-06-07T17:51:59Z