topic Re: docsis wireless in Wireless https://community.cisco.com/t5/wireless/docsis-wireless/m-p/311893#M87532 <HTML><HEAD></HEAD><BODY><P>This cofiguration Tech Tip for Wireless gives the commands necessary,</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/modules/ps2740/products_configuration_example09186a0080193dac.shtml" target="_blank">http://www.cisco.com/en/US/products/hw/modules/ps2740/products_configuration_example09186a0080193dac.shtml</A></P></BODY></HTML> Mon, 29 Nov 2004 19:55:20 GMT a-vazquez 2004-11-29T19:55:20Z docsis wireless https://community.cisco.com/t5/wireless/docsis-wireless/m-p/311892#M87531 <P>Hello </P><P></P><P>In docsis wireless, the upstream frequency translate if frequency(5Mhz to 42Mhz) to in rf frequency(500Mhz to 700Mhz).The upstream frequency are not specified in config-file (CMTS), but it is setting on rf module(upconverter and downconverter). </P><P></P><P>How do the cable modem will obtain the upstream rf ? </P><P>How we can configure the CMTS to download the appriopriate rf ? </P><P></P><P>please, it is very important.</P><P>Thank, Stephane. </P><P></P> Sun, 04 Jul 2021 17:11:10 GMT https://community.cisco.com/t5/wireless/docsis-wireless/m-p/311892#M87531 stephtchoko 2021-07-04T17:11:10Z Re: docsis wireless https://community.cisco.com/t5/wireless/docsis-wireless/m-p/311893#M87532 <HTML><HEAD></HEAD><BODY><P>This cofiguration Tech Tip for Wireless gives the commands necessary,</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/modules/ps2740/products_configuration_example09186a0080193dac.shtml" target="_blank">http://www.cisco.com/en/US/products/hw/modules/ps2740/products_configuration_example09186a0080193dac.shtml</A></P></BODY></HTML> Mon, 29 Nov 2004 19:55:20 GMT https://community.cisco.com/t5/wireless/docsis-wireless/m-p/311893#M87532 a-vazquez 2004-11-29T19:55:20Z