topic Wireless Bridge problem in Wireless

Wireless Bridge problem

johnnys — Sun, 04 Jul 2021 15:55:12 GMT

Goodday,

I have a 2 Aironet BR2040E working fine over 18km.

I'm upgrading to the Cisco BR350 , using the existing antennas.Which is 23dbi Grid antennas, with 10m low loss cable between antenna and bridge.

The Cisco bridges do not associate.

The cisco bridges however do work over a short distance, but not over 18km.

One is setup as root and the other as a nonroot.

The SSIDs are the same.

I have tried the different data rates and still not working.

On the old aironet bridges, the km needed to be specified.

Do I need to specify the km on the Cisco Bridges?

Any suggestions ?

regds

BERNHARD FIEGLMUELLER — Wed, 06 Aug 2003 06:47:50 GMT

Yes you have the configure the km on the Bridge:

Configure it under: Setup /Root Radio Advanced Page

regards Bernhard

johnnys — Tue, 12 Aug 2003 09:12:55 GMT

Hello,

Thanks, Its working, one more question.

I have configured it for 5.5Mbps,

Where can I view the data rates that its setup for.

regds

Johnny