topic Re: 802.11a cisco wireless bridge question in Wireless

802.11a cisco wireless bridge question

rrange — Mon, 05 Jul 2021 06:21:38 GMT

In researching the Cisco 802.11a products, I have seen the mention of the Aironet 1200 series which features an access point for thoroughput up to 54megabits per second for users within a building. Does Cisco offer an 802.11a bridge yet for intra building connectivity with these same speeds?

Re: 802.11a cisco wireless bridge question

bmcmurdo — Tue, 13 Aug 2002 21:07:15 GMT

No Cisco 802.11a bridge product has been announced by Cisco.

Re: 802.11a cisco wireless bridge question

blue.modal — Tue, 13 Aug 2002 22:28:53 GMT

A few manufacturers have promised 802.1a brides, but when you detemine the maximum distance allowed by .11a's power restrictions, those 'bridges' will likely only make it across the street - and at a much lower data rate than 54Mbps!

They can claim anything - but they can't break the laws of physics.

Matthew Wheeler

Chief Wireless Architect

www.BlueModal.com

Re: 802.11a cisco wireless bridge question

sales1 — Fri, 16 Aug 2002 14:03:14 GMT

Cisco announced about 802.11a features for 1200 series in August 2002, today we have 16-th.. we strongly waitin'!

I was tested 1200 AP's with 802.11b radio cards and 3338 bridge antennas, tried to insert Intel 5000 802.11a PC cards to 1200 AP, but doesn't work. Has Cisco answer about non-compatibility with Intel hardware.

Re: 802.11a cisco wireless bridge question

blue.modal — Wed, 21 Aug 2002 17:02:34 GMT

The 5.15-5.35GHz UNII space (802.11a) has a low power limit that makes it unsuitable for use as a bridge between two locations.

5.8GHz works very well for that purpose, however Cisco does not currently have a product in that frequency range.

Matthew Wheeler

Chief Wireless Architect