https://community.cisco.com/t5/wireless/map-units-in-mse/m-p/3043820#M88457 <P>Hi. We have a working system using PI2.1 and MSE 8.0. On PI under site map properties the units of measure is set to metres and all maps have the correct dimensions and APs and clients displaying in the correct locations. When I view a map using the MSE GUI however, the units are in feet. What was displaying as a 44.5m x 100m map in PI is displaying as a 44.5ft by 100ft map in MSE. Consequently, all the displayed locations on the MSE GUI are wrong.&nbsp;PI is reporting the maps as synchronised. Any thoughts?</P> Mon, 05 Jul 2021 13:25:21 GMT CCC4046_2 2021-07-05T13:25:21Z https://community.cisco.com/t5/wireless/map-units-in-mse/m-p/3043820#M88457 <P>Hi. We have a working system using PI2.1 and MSE 8.0. On PI under site map properties the units of measure is set to metres and all maps have the correct dimensions and APs and clients displaying in the correct locations. When I view a map using the MSE GUI however, the units are in feet. What was displaying as a 44.5m x 100m map in PI is displaying as a 44.5ft by 100ft map in MSE. Consequently, all the displayed locations on the MSE GUI are wrong.&nbsp;PI is reporting the maps as synchronised. Any thoughts?</P> Mon, 05 Jul 2021 13:25:21 GMT https://community.cisco.com/t5/wireless/map-units-in-mse/m-p/3043820#M88457 CCC4046_2 2021-07-05T13:25:21Z