Cert-Expiry-Ignore Command Not Available In 8.0.x?

Dan Man — Mon, 05 Jul 2021 11:54:48 GMT

For some reason, two AP's at one site, aren't joining our 5508 WLC. I see that the msglogs are stating that the certs are expired. I know that one of the solutions is to change the date on the WLC(which I don't want to do), and the other is to enable the command:

config ap cert-expiry-ignore {mic | ssc} enable

On 8.0.115.0 that command does not seem to be available. Are there any other similar commands that will bypass the cert check? I'm not sure why this is only happening for these two AP's at this site, and no other sites. Any help is much appreciated. Thanks.

This may be due to 8.0.115.0

Rasika Nayanajith — Tue, 19 Apr 2016 01:22:24 GMT

This may be due to 8.0.115.0 is an specific build.

Try to upgrade to 8.0.132.0 (8.0MR3) which is a public release. I have checked this on 8.0MR2(8.0.120.0) & this command is available on that as well.

HTH

Rasika

*** Pls rate all useful responses ***

topic Cert-Expiry-Ignore Command Not Available In 8.0.x? in Wireless

Cert-Expiry-Ignore Command Not Available In 8.0.x?

This may be due to 8.0.115.0