topic Cisco AIR-AP1252AG-A-K9 upgrade to LWAPP in Wireless

Cisco AIR-AP1252AG-A-K9 upgrade to LWAPP

mohammed miftaul haque — Sun, 04 Jul 2021 08:24:01 GMT

Dear Experts,

I am trying to upgrade the AIR-AP1252AG-A-K9 to LWAPP. I have the tftp server ready with IOS c1250-rcvk9w8-tar.124-21a.JA2.tar

when I enter the following archive comman, I get an error

archive download-sw /f /0 tftp://10.10.2.10/c1250-rcvk9w8-tar.124-21a.JA2.tar

% Invalid input detected at '^' marker.

here is the show version output

ap#sh version

Cisco IOS Software, C1250 Software (C1250-K9W7-M), Version 12.4(10b)JA1, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Compiled Wed 30-Jan-08 12:04 by prod_rel_team

ROM: Bootstrap program is C1250 boot loader

BOOTLDR: C1250 Boot Loader (C1250-BOOT-M) Version 12.4(18a)JA1, RELEASE SOFTWARE (fc1)

ap uptime is 3 hours, 8 minutes

System returned to ROM by power-on

System image file is "flash:/c1250-k9w7-mx.124-10b.JA1/c1250-k9w7-mx.124-10b.JA1"

Please help.

Re: Cisco AIR-AP1252AG-A-K9 upgrade to LWAPP

Scott Fella — Tue, 10 Dec 2013 15:10:36 GMT

I don't see where it's marking an error. Try the /r /o

Sent from Cisco Technical Support iPhone App

Cisco AIR-AP1252AG-A-K9 upgrade to LWAPP

mohammed miftaul haque — Tue, 10 Dec 2013 15:19:28 GMT

Thank you so much for your reply.

Please find the screen shot with the command error. It doesnt seem to recognise the command parameter download-sw.

Here is the commands I tried.

archive download-sw /f /0 tftp://a.b.c.d/c1250-rcvk9w8-tar.124-21a.JA2.tar

archive download-sw /overwrite /reload tftp://a.b.c.d/c1250-rcvk9w8-tar.124-21a.JA2.tar

archive tar /x tftp://a.b.c.d/c1250-rcvk9w8-tar.124-21a.JA2.tar flash:

(a.b.c.d is just for hiding the actual ip)

Thanks.

Re: Cisco AIR-AP1252AG-A-K9 upgrade to LWAPP

Scott Fella — Tue, 10 Dec 2013 15:49:35 GMT

Try doiing it this way.. using the mode button.

Using a TFTP Server to Return to a Previous Release

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

https://supportforums.cisco.com/docs/DOC-18268

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

http://www.youtube.com/watch?v=QQ_NuxdRhQ4

https://supportforums.cisco.com/docs/DOC-14960

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

Cisco AIR-AP1252AG-A-K9 upgrade to LWAPP

mohammed miftaul haque — Tue, 10 Dec 2013 15:57:40 GMT

Thank you for your valuable comment. I will try them on the AP and get back to you.

I really honour your efforts and will rate your comments as I complete with the commands.

Regards,

Cisco AIR-AP1252AG-A-K9 upgrade to LWAPP

mohammed miftaul haque — Tue, 10 Dec 2013 16:00:58 GMT

I was actually trying to convert it from Autonomous to LWAPP.

Thanks.

Cisco AIR-AP1252AG-A-K9 upgrade to LWAPP

Sandeep Choudhary — Tue, 10 Dec 2013 16:24:57 GMT

Hi Mohammed,

For the LWAP conversion, use the recovery image ( e.g c1250-rcvk9w8-tar.124-21a.JA2.tar). We can use the same command on the autonomous AP priviledge mode.

AP#archive download-sw /force-reload /overwrite tftp://10.10.10.1/c1250-rcvk9w8-tar.124-21a.JA2.tar

Try this .

Regards

Dont forget to arte helpful posts.

Cisco AIR-AP1252AG-A-K9 upgrade to LWAPP

Scott Fella — Tue, 10 Dec 2013 16:40:40 GMT

The mode button can be used to convert either way.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

Cisco AIR-AP1252AG-A-K9 upgrade to LWAPP

mohammed miftaul haque — Wed, 11 Dec 2013 09:05:11 GMT

Thanks so much Scott and Sandeep.

It worked fine.

Regards.

Re: Cisco AIR-AP1252AG-A-K9 upgrade to LWAPP

TC Network — Fri, 28 Oct 2022 04:14:36 GMT

Dear Mohammed

I am also trying to join this AP to controller, can you please share me the OS file. This device is EOS then we can not download from Cisco.

c1250-rcvk9w8-tar.124-21a.JA2.tar

Thank you