topic empty .csv file (after conversion to LWAPP) in Wireless https://community.cisco.com/t5/wireless/empty-csv-file-after-conversion-to-lwapp/m-p/683826#M89608 <P>has anyone encountered the above-mentioned? Flashing the AP from autonomous to lightweight generates the .csv file but it's empty.</P> Sat, 03 Jul 2021 20:10:04 GMT echelon360 2021-07-03T20:10:04Z empty .csv file (after conversion to LWAPP) https://community.cisco.com/t5/wireless/empty-csv-file-after-conversion-to-lwapp/m-p/683826#M89608 <P>has anyone encountered the above-mentioned? Flashing the AP from autonomous to lightweight generates the .csv file but it's empty.</P> Sat, 03 Jul 2021 20:10:04 GMT https://community.cisco.com/t5/wireless/empty-csv-file-after-conversion-to-lwapp/m-p/683826#M89608 echelon360 2021-07-03T20:10:04Z Re: empty .csv file (after conversion to LWAPP) https://community.cisco.com/t5/wireless/empty-csv-file-after-conversion-to-lwapp/m-p/683827#M89609 <HTML><HEAD></HEAD><BODY><P>I have seen this happen. usually it happens when I convert an AP, while connected to the network. It seems the conversion tool, will add the AP to the auth-list on the controller, but only seems to store a local .csv if it is not connected to the network.</P></BODY></HTML> Tue, 31 Oct 2006 14:48:29 GMT https://community.cisco.com/t5/wireless/empty-csv-file-after-conversion-to-lwapp/m-p/683827#M89609 Stephen Rodriguez 2006-10-31T14:48:29Z