topic If the same settings work for in Wireless

air ap2802i-e-k9

Mady Gueye — Mon, 05 Jul 2021 14:24:39 GMT

Hello,

Erroe from my new ap2802i-e-k9

see attach.

Regards,

Hi,

Sandeep Choudhary — Tue, 25 Jul 2017 12:52:49 GMT

Hi,

The settings in the Hyper Terminal/or Others need to be set correctly; otherwise, "strange-looking" or garbage characters may show up on the screen(As your output in attached file). When you set up the connection, use these settings and try again:

Bits per sec : 9600
Data bits : 8
Parity : none
Stop bits : 1
Flow control : none

Regards

Dont forget to rate helpful posts

thanks you for your answer,

Mady Gueye — Tue, 25 Jul 2017 13:01:12 GMT

thanks you for your answer,

i do that but still same

try to change the baud rate

Sandeep Choudhary — Tue, 25 Jul 2017 13:15:44 GMT

try to change the baud rate ex: 2400, 4800...., 115200 and check again.

stiil same but another new

Mady Gueye — Tue, 25 Jul 2017 13:22:35 GMT

stiil same but another new ap2802i-e-k9, all is ok

Either somebody changed the

patoberli — Tue, 25 Jul 2017 15:17:50 GMT

Either somebody changed the BAUD rate of it, or it's broken.

it's a new AP.

Mady Gueye — Tue, 25 Jul 2017 15:20:39 GMT

it's a new AP.

what i do to solve?

If the same settings work for

patoberli — Tue, 25 Jul 2017 15:22:11 GMT

If the same settings work for another AP and only not this one, I would return it, marked as "dead on arrival". You maybe need to do an RMA process, check with your reseller.

thank you, i will process to

Mady Gueye — Tue, 25 Jul 2017 15:24:05 GMT

thank you, i will process to RMA case.

regards,