DC connector and Power Supplied for AIR-AP1572EC1-A-K9

Jose Alberto Badilla Alfaro — Mon, 05 Jul 2021 13:38:28 GMT

Hi,

I have a brand new Access point for our Mesh Network, the model is: AIR-AP1572EC1-A-K9, this is not working either with Poe or power Injector, I'd like to know what is the power supplied that I need for the connector PN:29-100226-01, I'll be waiting for your comments.

AC Power Supply

soportefibratel — Wed, 12 Apr 2017 12:54:27 GMT

Model	AP1572IC	AP1572EC	AP1572EAC
Antennas	Internal antennas	External antennas
Input power options	Power-over-Cable, via Cable Modem DC	Power-over-Cable, via Cable Modem DC	AC Power DC PoE-In (Standard UPoE or AIR-PWRINJ1500-2 power injector)

AC Power Supply

Non PoC versions of the AP come equipped with an AC power supply. The power supply is designed to accept AC voltage from 100 V to 277 V RMS.

The following AC power cords are supported:

Product ID	Description
AIR-CORD-R3P-40NA=	Power cord, 40 ft, North American Plug
AIR-CORD-R3P-40UE=	Power cord, 40 ft, European Harmonized, Unterminated
AIR-PWR-ST-LT-R3P=	Power cord, 4 ft, Street Light Tap

For connecting Streetlight AC power to the access point, see Connecting Streetlight AC Power.

For connecting an AC power supply to the access point, see Connecting an AC Power Cable to the Access Point.

DC Interface

All versions of the AP have an externally accessible DC input connector. The DC input accepts voltages in the 10 to 16V range. The power supplied should be 10 amp.

For connecting a DC power supply to the access point, see Connecting a DC Power Cable to the Access Point.

PoE-Input

AC powered versions of AP1572EAC can be powered by UPOE compliant power sourcing equipment.

In addition to being powered by UPOE sources, the access point can also be powered by the AIR-PWRINJ1500-2 power injector.

The access point also supports an Ethernet uplink port (PoE-In). The access point Ethernet uplink port uses an RJ-45 connector (with weatherproofing) to link the access point to the 10BASE-T, 100BASE-T or 1000BASE-T network. The Ethernet cable is used to send and receive Ethernet data and to optionally supply inline power from the power injector or a suitably powered switch port.

Tip The access point senses the Ethernet and power signals and automatically switches internal circuitry to match the cable connections.

The Ethernet cable must be a shielded outdoor rated Category 5e (CAT5e) or better cable. The access point senses the Ethernet and power signals and automatically switches internal circuitry to match the cable connections.

Depending on the version of the AP, a 1572 series access point supports these power sources:

Power-over-Cable on AP1572IC and AP1572EC versions
AC power on AP1572EAC version

The 1572EAC access point can be powered via the PoE input from an in-line power injector or a suitably powered switch port. The AIR-PWRINJ1500-2= power injector can be used.

Model

soportefibratel — Wed, 12 Apr 2017 12:54:28 GMT

Model	AP1572IC	AP1572EC	AP1572EAC
Antennas	Internal antennas	External antennas
Input power options	Power-over-Cable, via Cable Modem DC	Power-over-Cable, via Cable Modem DC	AC Power DC PoE-In (Standard UPoE or AIR-PWRINJ1500-2 power injector)

topic Model in Wireless

DC connector and Power Supplied for AIR-AP1572EC1-A-K9

AC Power Supply

AC Power Supply

DC Interface

PoE-Input

Model