Cisco AIR-CAP2602I-A-K9 unable to factory reset

jyoung112 — Mon, 05 Jul 2021 11:01:35 GMT

I have this access point that has been placed in to a download loop (that issue is being rectified next week). I'm trying to do a factory reset of this access point so I can re-provision it.

With the AP unplugged, I've pressed and held the mode button and inserted the Ethernet cable. The AP goes through it's startup until the LED goes to solid red. At that point I release the mode button. The LED initiall blinks green, then goes to blinking red. At this point, the AP does nothing else.

Am I missing a step in performing the factory reset? Or is this AP now nothing more than a paperweight.

At this point, the AP does

Leo Laohoo — Sat, 03 Oct 2015 01:10:00 GMT

At this point, the AP does nothing else.

Console into the AP and post the entire process. I think there's something "missing" here. Maybe the AP is waiting for the response from the TFTP server.

topic At this point, the AP does in Wireless

Cisco AIR-CAP2602I-A-K9 unable to factory reset

At this point, the AP does